Skip to content

Gammill Parts

  • $42.00 - $42.00
    $42.00
    $42.00
    $42.00 - $42.00
    $42.00

    Bobbin Case Towa - Size M

    Size M TOWA Bobbin Case for all Gammill Quilting Machines and other longarms that use Size M or the Large bobbins. Premium High Quality bobbin case...

    View full details
    $42.00 - $42.00
    $42.00
    $42.00
    $42.00 - $42.00
    $42.00
  • $27.95 - $27.95
    $27.95
    $27.95 - $27.95
    $27.95

    Bobbin Case- L Size

    Bobbin Case for older Gammill Quilting Machines, that take the L size bobbins. We recommend the use of this bobbin case. It functions smoothly and...

    View full details
    $27.95 - $27.95
    $27.95
    $27.95 - $27.95
    $27.95
  • $6.00 - $6.00
    $6.00
    $6.00 - $6.00
    $6.00

    Bobbin Winder Adj. Spring (Ns)

    Release lever on the Bobbin Winder.

    $6.00 - $6.00
    $6.00
    $6.00 - $6.00
    $6.00
  • Save $0.81 Save $0.00
    $3.50
    $3.50 - $3.50
    $3.50
    $2.69
    $2.69 - $2.69
    $2.69

    Bobbin winder O-Ring Large - Plus, Statler, Vision Machines

    1-1/2" O-Ring for the machine on board bobbin winder. Does not fit stand-alone bobbin winder or the bobbin winder on the side of a Non-regulated ma...

    View full details
    $3.50
    $3.50 - $3.50
    $3.50
    $2.69
    $2.69 - $2.69
    $2.69
    Save $0.81 Save $0.00
  • Sold out
    $15.00 - $15.00
    $15.00
    $15.00 - $15.00
    $15.00

    Bobbin Winder Spindle/ Shaft- On Machine - 2001 And Newer

    This is the bobbin winder shaft for the Bobbin Winder on the Gammill Machines. The piece that the bobbin actually goes onto.

    $15.00 - $15.00
    $15.00
    $15.00 - $15.00
    $15.00
    Sold out
  • $2.00 - $2.00
    $2.00
    $2.00 - $2.00
    $2.00

    Bobbin Winder Wire (Spindle Spring)

    Replacement part for Bobbin Winder on Gammill Machines.

    $2.00 - $2.00
    $2.00
    $2.00 - $2.00
    $2.00
  • $1.00 - $1.00
    $1.00
    $1.00 - $1.00
    $1.00

    Brake Spring For L-Sized Bobbin Case

    Brake Spring for L Bobbin Case.  Small Bobbin Case - Not most Gammill machines.

    $1.00 - $1.00
    $1.00
    $1.00 - $1.00
    $1.00
  • $21.95 - $21.95
    $21.95
    $21.95 - $21.95
    $21.95

    Breeze Replacement Wheel for Gammill machine.

    Replacement Wheel for Gammill Machine.  This is the new breeze wheel that is used with your existing shim/spacer and hex bolt.  Not for original br...

    View full details
    $21.95 - $21.95
    $21.95
    $21.95 - $21.95
    $21.95
  • Save $1.66 Save $0.00
    $4.25
    $4.25 - $4.25
    $4.25
    $2.59
    $2.59 - $2.59
    $2.59

    Check Spring for Gammill Tension Assembly

    This check spring is part of the Gammill Rotary CheckSpring Tension Assembly Complete (MP-2002S).  

    $4.25
    $4.25 - $4.25
    $4.25
    $2.59
    $2.59 - $2.59
    $2.59
    Save $1.66 Save $0.00
  • Sold out
    $3.00 - $3.00
    $3.00
    $3.00 - $3.00
    $3.00

    Cone Spring, Intermittent

    Cone Spring for Intermittent Tension Assembly.

    $3.00 - $3.00
    $3.00
    $3.00 - $3.00
    $3.00
    Sold out
  • $21.00 - $21.00
    $21.00
    $21.00 - $21.00
    $21.00

    Curly / Squiggly Thread Guide Front

    Thread Guide above the needle on the front of the Gammill Quilting Machine.  If your thread is breaking try this.

    $21.00 - $21.00
    $21.00
    $21.00 - $21.00
    $21.00
  • $0.00 - $0.00
    $0.00
    $2.00
    $2.00 - $2.00
    $2.00

    Encoder O-ring for Gammill and Statler Machines - O'ring

    Encoder O-ring for Gammill / Statler long arm machine.s This o-ring fits both horizontal and vertical oring encoders. MUST HAVE Gammill spare parts...

    View full details
    $0.00 - $0.00
    $0.00
    $2.00
    $2.00 - $2.00
    $2.00
  • $8.75 - $8.75
    $8.75
    $8.75 - $8.75
    $8.75

    Encoder Wheel

    Wheel for the encoder o-ring.  Used on both old and new encoders with rubber o-rings.

    $8.75 - $8.75
    $8.75
    $8.75 - $8.75
    $8.75
  • $1.00 - $1.00
    $1.00
    $1.00 - $1.00
    $1.00

    Felt Washer for Gammill Check spring Assembly

    Felt washer for Gammill Checkspring Assembly.

    $1.00 - $1.00
    $1.00
    $1.00 - $1.00
    $1.00
  • $42.95 - $42.95
    $42.95
    $42.95 - $42.95
    $42.95

    Gammill Intermittent Tension Complete Assembly

    Also called Auxillary Intermittent Tension Assembly (Complete). This is the full assembly for the center tension on the Gammill Machines. Gammill P...

    View full details
    $42.95 - $42.95
    $42.95
    $42.95 - $42.95
    $42.95
  • $10.99 - $10.99
    $10.99
    $10.99 - $10.99
    $10.99

    Gammill Motor Belt 13"

    Rare belt for older Gammill Machines. Confirm size before ordering.

    $10.99 - $10.99
    $10.99
    $10.99 - $10.99
    $10.99
  • $10.99 - $10.99
    $10.99
    $10.99 - $10.99
    $10.99

    Gammill Motor Belt 14"

    Most common for older Gammill Machines. Confirm size before ordering.

    $10.99 - $10.99
    $10.99
    $10.99 - $10.99
    $10.99
  • Save $1.96 Save $0.00
    $12.95
    $12.95 - $12.95
    $12.95
    $10.99
    $10.99 - $10.99
    $10.99

    Gammill Motor Belt 17"

    Gammill Motor Belt. Fits all Plus, Minus, Vision, Vision 2.0, Elevate and Statler machines.        

    $12.95
    $12.95 - $12.95
    $12.95
    $10.99
    $10.99 - $10.99
    $10.99
    Save $1.96 Save $0.00
  • $32.95 - $32.95
    $32.95
    $32.95 - $32.95
    $32.95

    Gammill Rotary Check spring Tension Assembly Complete

    Gammill Rotary Check Spring Tension Assembly. This assembly is fully assembled, all you have to do is remove the existing one and put this one in i...

    View full details
    $32.95 - $32.95
    $32.95
    $32.95 - $32.95
    $32.95
  • Save $71.00 Save $0.00
    $220.00
    $220.00 - $220.00
    $220.00
    $149.00
    $149.00 - $149.00
    $149.00

    Gammill Statler Belt for 12ft Table

    This is the long Gammill  Statler table belt for a 12 foot table.  Also called X-axis belt.  

    $220.00
    $220.00 - $220.00
    $220.00
    $149.00
    $149.00 - $149.00
    $149.00
    Save $71.00 Save $0.00
  • $6.95 - $6.95
    $6.95
    $6.95 - $6.95
    $6.95

    Grey Switch Holder Casing for Gammill machines

    This casing is for the handle switches. It is grey in color and houses the black and red rs switch.  Used on Gammill Vision 1, statler and plus mac...

    View full details
    $6.95 - $6.95
    $6.95
    $6.95 - $6.95
    $6.95
  • $60.00 - $60.00
    $60.00
    $60.00 - $60.00
    $60.00

    Hook Assembly - L size

    Hook Assembly for Size 'L'. (also called sewing hook)Most common in sewing machines or domestic longarms

    $60.00 - $60.00
    $60.00
    $60.00 - $60.00
    $60.00
  • Sold out
    $34.95 - $34.95
    $34.95
    $34.95 - $34.95
    $34.95

    Hook Rocking Finger for Gammill machine

    Hook Rocking Finger is located in the bobbin case/sewing hook area of a Gammill machine.

    $34.95 - $34.95
    $34.95
    $34.95 - $34.95
    $34.95
    Sold out
  • $42.00 - $42.00
    $42.00
    $42.00 - $42.00
    $42.00

    Inspection Plate (18 & 22)

    Inspection Plate for Gammill Quilting Machines!

    $42.00 - $42.00
    $42.00
    $42.00 - $42.00
    $42.00