Machine Parts

Machine needles for use in Long Arm Quilting Machines. Used in Longarms APQS, Artistic AQ26, Eclipse, Gammill, Handi Quilter Infinity, INNOVA, Ken ...

Size M TOWA Bobbin Case for all Gammill Quilting Machines and other longarms that use Size M or the Large bobbins. Premium High Quality bobbin case...

Anti-Backlash Spring for MP-00-0214, for TOWA Bobbin Case - M Size,  Large bobbins. Used on Gammill and Statler machines.  Anti-Backlash Spring. Wa...

This check spring is part of the Gammill Rotary CheckSpring Tension Assembly Complete (MP-2002S).  

Anti-Backlash Spring for Bobbin Case that comes with Gammill Quilting Machines.  Also called Football anti-backlash spring.  ** If you have a TOWA ...

Felt washer for Gammill Rotary Check spring Assembly.

This handlebar switch is the start/stop switch for the Gammill Plus machine, Stitch Regulated, Vision and Statler Stitcher Gammill machines. This ...

This is the left handlebar switch two prong switch for the Plus Machine, Stitch Regulated, Vision 1 and Statler Stitcher Gammill longarm machines. ...

This needle bar screw enables the needle to stay in place in the needle bar on the Gammill machine.  

Gammill Motor Belt. Fits all Plus, Minus, Vision, Vision 2.0, Elevate and Statler machines.        

Specifically for the M size bobbin case or (Large). This amazing tool will relieve the stress of not knowing if your bobbin case tension is set cor...

Small O-Ring for original Gammill Stand-Alone Bobbin Winder. 

Black foam handle grips for Gammill/Statler machine handle bars. Sold as a pair of two grips!

This SPST Illuminated Rocker switch is used on the Gammill Plus stitch-regulated machine for the light and power.This red switch was also used for ...

Cleaning Brush, 2 inches. This cleaning brush is recommended for cleaning your bobbin case area, tracks and any other places where fuzzies can hide!

This is the "White" switch for Conventional (Non regulated) Minus machines. The switch has a grey cap cover over it. Not for use with the Stitch Re...

This is the Premium Hook Assembly - Fits Gammill and Statler Long arm quilting machines. Hook Assembly for Gammill Longarm quilting machines - size...

Cone spring for rotary tension assembly on Gammill machines.

100 M Size Bobbins for Gammill, Statler and other Longarm Quilting machines.  Save $25 when you purchase the 100pack! The Premium Good Bobbins !!!!

1-1/2" O-Ring for the machine on board bobbin winder. Does not fit stand-alone bobbin winder or the bobbin winder on the side of a Non-regulated ma...

This piece replaces the tension arm on the side of your M size bobbin case.

These size M or ( Large Size ) aluminum bobbins are manufactured with the exacting specifications of INNOVA. For use with INNOVA Longarm machines. ...

  This is the Red Switch for the Gammill Statler Stitcher Controller.

This is the Square Green power rocker switch for the Gammill Statler Stitcher Controller.

2 pack of 6 amp fast blow fuses,  Used in all Vision  Gammill machines.If you have a Plus or  Minus machine you will need the 5 amp fuse.

10 Piece Hex Key Wrench Set sizes: 1/16", 5/64", 3/32", 1/8", 3/16", 2mm, 2.5mm, 3mm, 4mm, 5mm. Great for those tiny jobs!!

Thread guide for Gammill machine.

Rod to support and hold small spools on Gammill machine. Rod and nut only.

BOBBIN, L size Sold individuallyThis bobbin is the same size as your sewing machine bobbin. It may fit older Premier Minus and Homecrafter machine...

This switch is for Gammill machines with no stitch regulator.   Most of the time on left handle bar.  

This encoder is for Gammill longarm machines with regulation.  This is the slip on encoder or non-locking.  Gammill Plus model machines use this en...

Z Motor Pulley for a Gammill Statler Machine.  Pulley has a 3/8″ center hole and 3 set screws.

5 Amp fuse.  Used in Gammill Plus and Minus machines.  The Vision machines use the 6 amp fast blow fuse.  Pack of (2)

Black rubber plug for front of Gammill Machines

This locking style encoder is used on all Vision and  Statler Gammill Longarm machines.  Controls the regulation on the machine.  Each machine has ...

This casing is for the handle switches. It is grey in color and houses the black and red rs switch.  Used on Gammill Vision 1, statler and plus mac...

Power and Motor rocker switch for Vision and Elevate Gammill machines. There are two of these on each machine on the top center of the sewing head.

Brake Spring for L Bobbin Case.  Small Bobbin Case - Not most Gammill machines.

C/D Handle Bar Rocker Switch for Vision 2.0

Part of Laser Light Assembly on Statler and Gammill machines.

This Laser light is used on Statler, Plus and Minus Gammill models.  Not Vision or Elevate.