Gammill Parts - Electrical

This cable is for a 2 wire motor. This will reverse the motor during a maintenance to help send the oil to places it will normally miss in the regu...

Fan for the inside of a Gammill Controller.

Size M TOWA Bobbin Case for all Gammill Quilting Machines and other longarms that use Size M or the Large bobbins. Premium High Quality bobbin case...

Power Supply for your Gammill MOD 3, MOD A, D & E Controller. Power Supply is modified to plug and play for the controller, no adaption needed.

Antec Power Supply for MOD F Controller Only! Power Supply is modified to plug and play for the controller, no adaption needed.

Power Supply is modified to plug and play for the controller, no adaption needed.  

Switch Connectors to be used to attach the wiring of the switches. Also known as on/off handle switch clips.  Used with the regulated machines for ...

Y Encoder Cable (Crosstrack) for Gammill Vision 1.0 & 2.0 Machines

Vertical Channel Lock Cable for Gammill Vision 1.0 & 2.0 Machines

If you are currently using a VGA cable for your monitor on your Statler and you are upgrading to a new Windows 10 Gammill computer you will need a ...

10ft 16 Gauge Extension Cord

Handle Bar Light for Gammill machines. This is not an LED light.

This curly cord/cable (similar to telephone cord) is used with the vertical and horizontal encoders. This cord / cable plugs into the back of the P...

X Encoder Cable (Crosstrack) for Gammill Vision 1.0 & 2.0 Machines.

5 Amp fuse. Used in all machines before The VISION by Gammill. If you have a Plus and Minus (or non-regulated). This is the fuse you need. All Visi...

2 pack of 6 amp fuse, to be used in all Vision by Gammill machines.If you have a machine that was before the Vision model (ie Plus, Minus) you will...

If your machine error is "no response from encoder node" or "no response from sensor node" you will need to replace this board.   The sensor board ...

This laser light is for use with the "Plus and Statler" machines, not the newest Vision by Gammill machines. The style of plug for this light will ...

Replacement socket for Gammill Light Bars

For you Gammill Statler Controller that is a MOD A-F. This item cannot be returned!

Complete Wiring Harness for a Statler Controller MOD F with a Breeze Track System. This item cannot be returned.

Mod G Power Cable GAMMILL MOD G POWER CABLE part S-ASY,CBL MG PW This is the  Power Replacement Cable for the Statler Mod G machines.  It connects ...

This is a used and tested motor. This Motor will work on a Gammill, Plus, Vision 1 or Vision 2 if your current motor has PM8014 on it.  If you are ...

This is the Y - motor for the Statler Cross Track.

Needle Position Board for Minus or non-regulated Gammill  Conventional machines. Will NOT work with Stitch Regulated or Statler Stitcher machines.

PM 8013 for a Premier Plus or Vision 18 Not for Statler This item cannot be returned!

Switch Cap Cover for Push Button on Gammill Minus Machines

Disc to restore your Windows 8 3020 Tower to Gammill factory settings.

Restore Disc for your Windows 8 Gammill Computer 3040 Tower.

Restore Disc for your Gammill Windows 8 Computer 9030 Optiplex Tower.

Recovery USB Drive for your Gammill XE2/Win 10 Computer

Disc to restore your Windows 7  3010 Optiplex Gammill Computer

Disc to restore your Windows 7 9020 All in One Gammill Computer

 Install this clip around all the cords at the back of your Statler machine to keep the cables from getting in the way!

This is an update kit for your Firmware on your controller. If you have a Windows XP or earlier you will want to update your Firmware on your comp...

Complete switch box with switches for a Staler with a MOD 3 & A-F

Complete switch box with switches for a Staler with a MOD G