|
|
Gammill Stand Alone Bobbin Winder - pedal only
|
Gammill Stand Alone Bobbin Winder
|
Our Price: Call for Availability 1-800-893-2748
The Control Board is part of the computer circuitry inside the machine. It is only used for non-stitch regulated machines.
|
Our Price: Call for Availability 1-800-893-2748
Stitch Regulated Display Board
|
5 Amp fuse. Used in all machines before The VISION by Gammill. If you have a Plus, Minus (or non-regulated), or Statler Stitcher.... This is the fuse you need. All Vision machines are taking the 6 amp fuse. See [More Info]
|
Horizontal Encoder Cable (stitch-regulated machines only)
|
Our Price: Call for Availability 1-800-893-2748
Hydraulics Kit
|
This light bar is not fully adjustable. The adjustable component is merely the height. At time of set-up, you have the latitude to lower the height of the light bar approx. 12".
|
Our Price: Call for Availability 1-800-893-2748
Motherboard
|
Our Price: Call for Availability 1-800-893-2748
Machine Motor
|
Set of 2 brushes. Facilitates power to the motor.
|
|
|
MSRP: $29.95
Our Price: $20.00
You Save: $9.95 (33 %)
This wire is placed between the connectors of the cable under the motor. It runs the machine backwards to distribute oil beneath the bushings.
|
MSRP: $29.95
Our Price: $20.00
You Save: $9.95 (33 %)
This wire is placed between the connectors of the cable under the motor. It runs the machine backwards to distribute oil beneath the bushings.
|
Laser Light for pantograph patterns (click on More Info, View More Images, Next, to see a picture of the newest style laser light assembled with the T-bar and pin)
|
Laser Light for pantograph patterns (click on More Info, View More Images, Next, to see a picture of the newest style laser light assembled with the T-bar and pin)
|
This casing is for the handle switches. It is gray in color and houses the switch.
|
Switch Connectors (for stitch-regulated machines, sold individually)
|
Switch Connectors (for conventional, non stitch-regulated machines)
sold individually
|
This cover is placed over the top of the "white" switch (switch with 3 prongs) in the handle.
|
This switch is for older machines. Possibly regulated or non-regulated. Has a smaller plastic top. Is used in each handle. Whether red or black, the black two prong switch will work.
|
Left handle on "Plus model" or "Vision" Machines
|
This is the start/stop switch for the Stitch Regulated and Statler Stitcher machines. This is a two-prong switch with a red cap. (called the Red Switch)
|
This power switch is red, square, pushes in. The casing of the switch is round and black. This switch is used on the non-regulated machine for the light and power.
|
This power switch is red, round, and rocks side to side. The casing of the switch is black. This switch is used on the stitch-regulated machine for the light and power.
|
This momentary/single stitch switch has two prongs and is used on the non-regulated machine.
|
For Conventional machines. (named "white" switch for the color of the plastic tubing on the top)
|
This cord/cable is used to send power to the vertical encoder.
| |